The two semi-pivots are then joined with three steel screws placed inside the wheel side. In the caliper body there are 4 pistons with a diameter of 32 mm. 484" given by Brembo, derives from the displacement of a single piston of the caliper measured in "cubic inch, typical of the VTwin market. This clamp adopts radial fixing technology to guarantee maximum operating precision. The sliding of the pads on the body takes place through special guides, obtained on the body of the caliper, which allow the elimination of the pad pins.The finish of the caliper is obtained with a hard oxidation treatment in anthracite black, while a large Brembo logo, in the characteristic red color, is obtained on the top of the piston, on the disc inlet side. The pair of pliers is supplied in kit with: already installed sintered pads, specific instruction sheet and Brembo adhesive pair. This item is in the category "Auto e moto: ricambi e accessori\Moto: ricambi\Freni e ricambi\Pinze freno e ricambi".
The seller is "omnia-racing" and is located in this country: IT. This item can be shipped worldwide.