Brembo Racing couple of radial caliper P4 32 CNC. 484 100mm wheelbase Cafe Racer kit (LH+RH). The Brembo calipers of the. 484 series aim to satisfy the needs of those who want to improve the performance of the braking system, giving the bike a strong mark from Cafè Racer. This caliper is completely obtained from the CNC, starting from an aluminum block worked with the most modern Cam technologies.
The two semi-pivots are then joined with three steel screws placed inside the wheel side. In the caliper body there are 4 pistons with a diameter of 32 mm.
484" given by Brembo, derives from the displacement of a single piston of the caliper measured in "cubic inch, typical of the VTwin market. This clamp adopts radial fixing technology to guarantee maximum operating precision.The sliding of the pads on the body takes place through special guides, obtained on the body of the caliper, which allow the elimination of the pad pins. The finish of the caliper is obtained with a hard oxidation treatment in anthracite black, while a large Brembo logo, in the characteristic red color, is obtained on the top of the piston, on the disc inlet side. The pair of pliers is supplied in kit with: already installed sintered pads, specific instruction sheet and Brembo adhesive pair.
In 1994, the Passion and Experience of Fabrizio Bertollini created OMNIA RACING , with the aim of representing a reference point for everyone fond of bikes. In 2000, when Salvatore Orefice joins OMNIA RACING , the OMNIA RACING Special Parts project is founded, a society based on the passion and competence needed to create and trade the top products for motorbikes. Our continuous search for perfection and performance, using advanced technologies, has allowed OMNIA RACING Special Parts to interact with internationally famous pilots and teams. Our products are excellent for both road and circuit use.They are constantly tested by our technicians and pilots, thus improving the techicnal, dynamical and structurale features of the materials adopted and of the special parts produced. The experience gained through the years has permitted Omnia Racing Special Parts to be extremely selective in the choice of the firms and of the products distributed. Accostato, Afam, Aim, Akrapovic, Andreani, Arrow, Bazzaz, BC battery controller, Bitubo, BMC, Braking, Brembo, BST, Capit, Castrol, Derry Moto, Diapason, DID, Discacciati, Eibach, EK, Fabbri, Far, FrenTubo, Galfer, GBRacing, Giannelli, Gifrap, Givi, Gopro Hero, GPT, H2O, Hagon, Ixil, JollyMoto, Kappa, Laser, LCR selle, Leovince, Lightech, Mafra, Marchesini, Marvic, Marzocchi, Matris, Mivv, MRA, Nissin, Ohlins, PBR, Polini, PT, Rizoma, RME, Robby Moto, Sachs, STM, Stomp, SuperB, Suter, Termignoni, Valtermoto. OMNIA RACING Special Parts is in close contact with its customers, taking part to several important events: Bike Expò Padova, national and international races, free circuit sessions. On the web, our "on-line shop window" is always associated with a direct contact with the customers, so as to suggest them the product that best suits their needs.
This should allow our customers to feel at ease and to trust us. All this has allowed us to become, in less than a decade, a reference point in Italy; in addition, our products are increasingly demanded also in Europe and in the US.
The item "Brembo 2 étriers frein radial P4 32 CNC 484 emp 100mm Cafe racer kit SX+DX" is in sale since Wednesday, March 14, 2018. This item is in the category "Véhicules\ pièces, accessoires\Moto\ pièces détachées\Freins, suspension\Étriers, pièces". The seller is "omnia-racing" and is located in 80055. This item can be shipped worldwide.